Hercules ® Model 9507TV is the most powerful lift machine of the the ADC line. Equipped with electronic frequency drive control, this machine provides versatility and protection for the most demanding lift applications. The 9507TV machine offers a multitude of parameters that can be programmed in the field to meet almost any project requirement speed, maximum obtainable speed, acceleration ramp time and deceleration ramp time are easily changed right at the drive. The machine is also equipped with deceleration limit switches which allow the machine to gradually decelerate to a stop, dissipating inertial energy rather than abruptly stopping at the end of its travel. The machine does feature emergency overtravel limit switches and fast stop push buttons which bypass the deceleration ramp and shut the machine off immediately in the event of a problem during operation. The operation of these machines is Start/Stop/Reverse/Fast-Stop from any point of travel and low voltage controls is standard (some machines also require a remote reset button at the remote control station). If versatility and power are a requirement, the Model 9507TV is an excellent choice.
Standard unit is equipped with:
- Lift capacity 1200 pounds
- Rotary Limit Switches for decelerate to full open and declelerate to full closed positions as well as immediate stop over travel limits for the open and close directions.
- Low Voltage Control - 24 vac
- Remote Control Station (RCS1-TV)
- Fast stop (F-Stop) loop and pushbutton which provides instaneous stop of the machine, bypassing the deceleration ramps.
- Variable speed operation from 0 to 54 fpm
- Machine Guard
- Helical Grooved Drum 14"L x 6"D Provides up to 55' of travel
- Channel Steel Base
- Connects to 230 volt, 3-phase power sources (208 volt , 3-phase is available as an option).
- ETL Listing on the entire machine, not just the control box
- Approximate shipping weight 350 pounds