Automatic Devices Company

A Track & Machine
For Every Purpose

113 Specifine®

 

Model 113 SPECIFINE® track is an aluminum box-shaped curtain track specifically designed to meet architectural specifications for straight curtains up to 20' in length. Classrooms, residences, boardrooms, multi-purpose rooms, cafeterias, churches, hotels, banks, are all ideal applications for the Model 113 SPECIFINE® track. This track can be either recessed, surface mounted, or can be suspended from the ceiling. The cord is completely concealed within the track channel. The carriers move effortlessly through the track channel without the carrier block binding against the channel. Dovetail design on exterior of channel allows joint compound to seep into slot allowing a flush finish.

 

SPECIFICATIONS:

Model 113 SPECIFINE® Curtain Tracks: Curtain tracks (Model 1100-A) shall be of 16 gauge extruded aluminum construction with an anodized finish and entirely enclosed, except for slot in bottom.  Track shall be furnished in one continuous piece (20' maximum) except where Splicing Clamps (Model 1124-A) are required.  Curtain Carriers (Model 1131) shall be place on 6" centers and shall be constructed of a non-binding nylon body supported by self-lubricating nylon wheels rolling on separate treads.  Live End and Dead-End (Model1134) pulleys shall be equipped with nylon ball-bearing wheels adequately guarded.  Curtain overlap shall be provided by Master Carriers (Model 1132) which shall provide 12" of overlap (6" in front of 6").  The manufacturer shall furnish a tension Floor Pulley (Model 1135) for increasing cord tension. Stretch-resistant operating cord (Model 1150 for hand operated track systems and Model 1151 for motorized track systems) shall have synthetic or wire center and shall be of 1/8" diameter. Operating lines shall be concealed within the track.  For direct mounting to an overhead structure, the track shall be drilled along its length and bolted directly to the overhead structural member.  For suspended systems, Hanging Clamps (Model 1138) shall be secured to the track every 4' along the track length and shall be supported by adequate suspension media.   Model 113 as manufactured by Automatic Devices Company of Allentown, PA. 

Model 113-A SPECIFINE® Curtain Tracks (Walk-Along Track System): Curtain tracks (Model 1100-A) shall be of 16 gauge extruded aluminum construction with an anodized finish and entirely enclosed, except for slot in bottom.  Track shall be furnished in one continuous piece (20' maximum) except where Splicing Clamps (Model 1124-A) are required.  Curtain Carriers (Model 1131) shall be place on 6" centers and shall be constructed of a non-binding nylon body supported by self-lubricating nylon wheels rolling on separate treads.  The manufacturer shall provide and End Stop (Model 1109) for each end of the track.  Curtain overlap shall be provided by Master Carriers (Model 1132) which shall provide 12" of overlap (6" in front of 6").  For direct mounting to an overhead structure, the track shall be drilled along its length and bolted directly to the overhead structural member.  For suspended systems, Hanging Clamps (Model 1138) shall be secured to the track every 4' along the track length and shall be supported by adequate suspension media.  Model 113-A as manufactured by Automatic Devices Company of Allentown, PA.

DOCUMENTS & DOWNLOADS:

You must be logged in to view these files.